#

Стандарты и Директивыand

Мы работаем на регулируемом глобальном рынке во многих странах. Таким образом, мы должны управлять требованиями, которые могут значительно отличаться в разных странах или регионах.
Общая цель наших менеджеров и служб - предложить надежную, устойчивую, высокопроизводительную продукцию, соответствующую нормативным требованиям и/или стандартам каждой территории, где она используется.
#
#

Standards and certifications

All you need to know about PPE standards

Сброс всех фильтров
Фильтр
Standards

EN511 COLD RISK

The EN511 standard defines the requirements and test methods for cold protection gloves from cold transmitted by convection or conduction down to -30°C (optionally up to -50°C). This cold can be from climatic conditions or industrial activity.

The selection process of a cold protection glove must take into account several parameters such as the ambient temperature, the health of the person, the duration of exposure, and the level of activities.

PERFORMANCE
LEVEL		    INTENSE  AVERAGE
ACTIVITY		 SLOW ACTIVITY
1 -10°C ≤ T < 0°C    
2 -30°C < T  0°C ≤ T < 10°C  
3   -15°C < T  5°C < T
4   -30°C < T  -10°C < T

 

EN361 FULL BODY HARNESS

Body securing device intended to stop falls. The full body harness can be made of straps, buckles and other elements; set and adjusted in a right way on the body of an individual to secure him during a fall and afterwards.

EN358 BELTS AND POSITIONING LINES

A work positioning system consists of elements (belt and work positioning line), joined together to form a complete piece of equipment.

EN ISO 20471

HIGH VISIBILITY CLOTHING

This standard specifies the requirements for protective clothing aiming to signal the presence of the wearer visually, so that he may be detected and seen in hazardous situations, in all conditions of daylight, and night under illumination of car headlights.

There are three classes of high-visibility clothing. Each class must have minimum surfaces of visible material constituting the garment; the higher the class, the more visible the garment:

 

  Class 3 Class 2 Class 1
Background material (Fluorescent) 0,80 m² 0,50 m² 0,14 m²
Retroreflective material (Bands) 0,20 m² 0,13 m² 0,10 m²

 

Marking : 

X : Class of high visibility surface (from 1 to 3)

EN ISO 20471  

2
Max. 25x

EN ISO 20471

2 : Class of hight visibility surface (from 1 to 3)

Max. 25x : Optional marking, number of maximum washes authorized for the model. On this example: 25 washes maximum (see indication of service temperature on the garment tag).