#

Standards and directives

We operate in a regulated global market in many countries. Thus, we must manage requirements that may vary greatly between countries or regions.
The common goal of our product managers and services is to offer reliable, sustainable, high-performance products in compliance with the regulations and/or standards of each territory where they are used.
#
#

Standards and certifications

All you need to know about PPE standards

Reset all
Filter
Standards
Reset

EN14605: Type 4/ Type 3 PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS

Requirements for chemical protection clothing with liquid-tight (type 3) or spray-tight (type 4) connections, including items providing only partial body protection (types PB [3] and PB [4]).


This standard sets out the minimum requirements for the following types of limited use and reuseable chemical protective clothing:


- Clothing protecting the full body with liquid-tight connections between the various clothing parts (Type 3: liquid-tight clothing) ;
- Clothing protecting the full body with spray-tight connections between the various clothing parts (Type 4: spray-tight clothing) ;
 

STANDARDS TYPE CHEMICAL PROTECTION
EN13034 6 Against splashes
EN ISO 13982-1 5 Against dust (asbestos)
EN14605 4 Against mists
EN14605 3 Against sprays

 

TESTS
General performance Tests & Specific performances Level of protection
3a 4a 5 6a
Performance
requirements
for the whole
garment		 Internal pressure - - - -
Leak to interior - - X -
Penetration by a jet of liquid X - - -
Penetration by a spray (liquid spraying) - X - -
Against solid particles - - X -
Penetration by a spray (light spraying) - - - X
Performance
requirements for
seams and joints		 Mechanical resistance X X X X
Resistance to permeation and penetration by liquids X X - -
Performance
requirements for the constituent materials
of the garment		 Abrasion / Tearing / Perforation X X X X
Resistance to tensile strength X X - X
Resistance to cracking by bending X X X -
Resistance to cracking by bending at -30°C

X

optional

X

optional

 - -
Resistance to pemeation by liquids X X - -
Resistance to penetration by
liquids		 - - - X
Repulsion to liquids - - - X

a - When the protective equipment only protects certain parts of the body (torso, arms, legs), only the performance requirements for the materials making up the garment are required required (types 6, 4 and 3).

EN ISO 11611

PROTECTION USED IN WELDING AND ALLIED PROCESSES

This standard specifies the performance requirements for protective clothing for use by operators in welding and allied processes with comparable risks. This type of protective clothing is intended to protect the wearer against molten metal splash, short contact with flame and UV radiation. It is intended to be worn at ambient temperature, continuously for up to 8 hours.

 

CLASS 1 protection against low risks during welding techniques and situations producing fewer projections and low radiant heat.
CLASS 2 protection against higher risks during welding techniques and situations producing more projections and a higher radiant heat.

 

MAIVE2

EN ISO 11611

A, A2

CLASS1

 

Test Code Performances
Limited flame spread A A1 and/or A2
Molten metal splash E E1 to E3